Raymond mill

Raymond mill Introduction:

Raymond mill is used for ultra-fine powder processing of 280 materials, with the Moh?s hardness of 7 below and humidity of 6% below, in the works of non-flammable mining, chemical industry, building materials and metallurgy, etc. The materials include barite, calcite, potash feldspar, talc, marble, limestone, pottery and glass, etc. The particle size of finished product can be adjusted freely from 100mesh to 325mesh.
Producing process
Firstly, raw material is transported into the grinding chamber evenly and continuously for powder-processing. Due to the centrifugal force caused by rotation, the rollers oscillate outward to press the ring, and then the shovel scoops up the materials to the space between the ring and rollers to accomplish the grinding.
Raymond mill application:

After grinding, the powder is brought into the analyzer by the circulation wind of blower and is classified. The large-sized powder is recycled by the air from the blower back into the grinding chamber for regrinding, and the fine powder is blown into the cyclone and poured out through the output-powder pipe as the final products.
Because the material to be grinded contains certain moisture, the heat is made in the raymond grinding process, then the moisture is evaporated, and the outside gas is sucked, so the cycle air pressure increases. To ensure the raymond mill working in the vacuum state, the increased gas flows through the tube into the dust filter, and then is discharged into the atmosphere after purification.
3R1410, 3R2115, 3R2615, 3R2714, 4R2714, 3R3016, 4R3016, 4R3216, 5R4119

Raymond mill